Instruction manual

28
The KN9000 devices list displays KN9000 devices on the local LAN segment.
To configure a KN9000 unit, complete one of the following options:
- If the unit you want to configure appears in the KN9000 devices list, double-
click the name.
- If the unit you want to configure does not appear in the KN9000 devices list,
enter the correct IP address and Port number in the KN9000 address and
Port fields and then click Login.
Logging In
Once the Administrator Tool connects to the specified unit, the login window
appears. Only users with configuration privileges (see User Management
Permissions, p 41) may login to the Administrator Tool.
1. Enter a valid Username and Password, and then click Login.
NOTE: The default Username is administrator; the default Password is password. You
can change either of these to a desired username and password (see User Management, p.
41) after login.