User manual

Appendix
205
KA7140 Configuration and Operation
The KA7140 Adapter Cable connects a serial device to the switch.
Configuration
To configure the KA7140 to interact with the connected device, you need to set
its serial parameters to match the parameters of the device, as follows:
1. In the Port Access page, right click on the port that the KA7140 is
connected to.
2. In the popup that appears, choose Port Configuration to bring up the Port
Properties dialog box:
3. Select the appropriate values for the connected device, then click Save.
Operation
To operate the device connected to the port, in the Port Access page double
click the port. After you switch to the port, issue the command that calls up the
device.
kn2124v-4132.book Page 205 Tuesday, March 10, 2009 11:29 AM