User manual

KVM Over the NET™ User Manual

Up to 32 users can share the remote buses. A Message Board feature allows

them to communicate with each other to facilitate port sharing.

Administrators can handle a multitude of maintenance tasks with ease – from

installing and running GUI applications, to BIOS level troubleshooting, routine

monitoring, concurrent maintenance, system administration, rebooting and

even pre-booting functions.

Local console operation is easily accomplished either by entering hotkey

combinations from the keyboard with a full screen GUI display.

Monitoring the installation’s activities couldn’t be easier. An convenient Auto

Scan feature permits automatic switching from port to ports at user-specified

intervals, while the Panel Array Mode can display the video output of up to 40

computers at the same time.

The switches feature RJ-45 connectors allowing them to use CAT 5e cable to

link to the computers. This space-saving innovation means that a full 16, 24,

32 or 40 port switch can be conveniently installed in a 1U system rack, and the

installation can take advantage of the internal network wiring built into most

modern commercial buildings.

Setup is fast and easy; plugging cables into their appropriate ports is all that is

entailed. Because the switch intercepts keyboard input directly, there is no need

to get involved in complex software installation routines, or to be concerned

with incompatibility problems.

Since the firmware is upgradeable over the Net, you can stay current with the

latest functionality improvements simply by downloading firmware updates

from our website as they become available.

Local

Remote

KN4140v

1 - 20

21 - 40

TCP/IP

kn2124v-4132.book Page 2 Tuesday, March 10, 2009 11:29 AM