User manual

59
Chapter 5
The Windows Client
Activating the Browser OSD
After you have successfully logged in (see Logging In, page 55), to activate the
browser based Windows Client OSD do the following:
1. Click the Windows Client button (the one without the arrow) at the left of
the web page.
Note: 1. You must have DirectX 7.0 or higher installed on your computer.
If not, the Windows Client will not load. If you don't already have
it, DirectX is available for free download from Microsoft's web
site: http://www.microsoft.com/downloads.
2. The Windows Client button with the arrow is for running the AP
version of the Windows Client (see AP Operation, page 99).
2. Accept the security certificates.
3. When the browser dialog asks whether to run or save the program file,
click Run.
Note: 1. If the browser cannot run the file, save it to disk, instead. Then,
with your browser still open to the KN2108 / KN2116 web page,
run the file from your disk.
2. If you use the save to disk method, for security purposes, you
cannot simply run a previously downloaded version of the
program. Each time you want to access the KN2108 / KN2116,
you must log in to the web page with a valid username and
password to download a fresh copy of the program.
kn2116.book Page 59 Thursday, July 10, 2008 4:05 PM