User manual

Chapter 1. Introduction
5
KVM Adapter Cables (CPU Modules)
 Cat 5 (or higher) cable is required to connect the KN2108 / KN2116 to one
of the KVM Adapter Cables (see Single Stage Installation Diagram,
page 20).
 The following KVM Adapter Cables are required for use with the KN2108
/ KN2116:
Function Module
Connect to devices with PS/2 ports KA9120
Connect to devices with USB ports KA9170
Connect to Sun Legacy computers KA9130
Connect to Sun USB computers KA9131
Connect to serial based devices KA9140
kn2116.book Page 5 Thursday, July 10, 2008 4:05 PM