User manual

KN2108 / KN2116 User Manual

104

Connecting

To connect to a KN2108 / KN2116 unit:

1. If it is in the Server List, double click it; if you are using the Server IP

input box, specify the IP address and Port number, then click Connect. A

2. Key in a valid Username and Password, then click OK.

The program attempts to contact your selected KN2108 / KN2116 unit.

While it does so, you can check the Message List window for status

messages regarding the operation's progress.

3. Once contact with the KN2108 / KN2116 has been established, the Switch

to Remote View button becomes active.

Click it to connect to the KN2108 / KN2116 and take over console control

of the unit that is connected to it.

kn2116.book Page 104 Thursday, July 10, 2008 4:05 PM