User manual

KN2108 / KN2116 User Manual
66
Panel Array Mode
Clicking the OSD Toolbar's Panel icon invokes Panel Array Mode. Under this
mode, the OSD divides your screen into a 2 x 4 grid of 8 panels (KN2108), or
a 4 x 4 grid of 16 panels (KN2116):
 Each panel represents one of the KN2108 / KN2116's ports. Starting with
Port 1 at the upper left; going from left to right; top to bottom; Port 8
(KN2108), or Port 16 (KN2116), is at the lower right.
 When the Array is first invoked, it scans through each of the ports that were
selected for Auto Scanning under the Configuration page's Scan Select
function (see page 80), and displays information about the port (port name,
resolution, on line status, port access status), at the bottom of the panel.
 The number of panels in the array (16, 9, 4, or 1) can be selected by
clicking Show More Ports, and Show Fewer Ports on the panel array
toolbar (see the following page).
 If the computer connected to a port is on line, its screen displays in its
panel, otherwise the panel is blank.
 Only ports that are accessible to the currently logged in user (see Port
Access, page 38), are displayed. For ports that are not accessible, the panel
is blank.
 If you move the mouse pointer over a panel, information about the port
displays at the bottom of the panel.
kn2116_2006-12.book Page 66 Monday, January 29, 2007 3:24 PM