User manual

KN1000 User Manual
70
Maintenance
The Maintenance page allows the Administrator to upgrade the KN1000’s
firmware, and to backup and restore the KN1000’s configuration settings and
user profile information.
Firmware Upgrade
As new versions of the KN1000 firmware become available, they can be
downloaded from our website. Check the website regularly to find the latest
information and packages.
To upgrade the firmware, do the following:
1. Download the new firmware file to your computer.
2. Open your browser; log in to the KN1000; and click the Firmware icon to
bring up the Firmware File dialog box:
3. Click Browse; navigate to the directory that the new firmware file is in
and select the file.
4. Click Upgrade Firmware.
If Check Firmware Version is enabled (the default), when you perform an
upgrade the current firmware level is compared with that of the upgrade
file. If the current version is higher than the upgrade version, a message
appears informing you of the fact and the procedure stops.
Note: If you want to install an older firmware version, you must uncheck
the Check Firmware Version checkbox before clicking Upgrade
Firmware.
5. After the upload completes, a message appears on the screen to inform you
that the operations succeeded. Click Logout at the bottom left of the Main
web page.
6. In the screen that comes up click Ye s to confirm that you want to exit and
reset the KN1000.
Note: You will need to wait a bit before logging back in.