User manual

4. Administration
67
USB IO
Settings
OS Specifies the operating system that the server on the
connected port is using. Choices are Win, Mac, Sun, and
Other. The default is Win.
Language Specifies the OS language being used by the server on
the connected port. Drop down the list to see the available
choices. The default is English US.
Multiuser Mode Defines how a port is to be accessed when multiple users
have logged on, as follows:
Exclusive: The first user to switch to the port has
exclusive control over the port. No other users can view
the port.
Occupy: The first user to switch to the port has control
over the port. However, additional users may view the
port’s video display.
Share: Users simultaneously share control over the port.
Input from the users is placed in a queue and executed
chronologically. Under these circumstances, users can
take advantage of the Message Board, which allows a
user to take control of the keyboard and mouse or
keyboard, mouse, and video of a Share port (see The
Message Board, page 92).
Reset Some configuration changes only take effect after a
KN1000 reset. These include changes on the Network
page; a Log Server port change; enabling/disabling
browser access; and upgrading the firmware.
For those changes, a check is automatically put in the
Reset on Exit box.
To have the changes take effect, log out and then log back
in again. A wait of approximately 30 to 60 seconds is
necessary before logging in following the reset.
Note:
If the KN1000’s performance degrades, reset it by putting
a check in the Reset on Exit box, and then log out / log in.
Parameter Explanation