User manual

KN1000 User Manual
46
CC Management Settings
To allow authorization for the KN1000 through a CC (Control Center) server,
check Enable and fill in the CC Server’s IP address and the port that it listens
on in the appropriate fields.
LDAP Settings
The KN1000 allows log in authentication and authorization through external
programs. To allow authentication and authorization via LDAP or LDAPS, the
Active Directory’s LDAP Schema must be extended so that an extended
attribute name for the KN1000 – KN1000-accessRight – is added as an
optional attribute to the person class.
Note: Authentication refers to determining the authenticity of the person
logging in; authorization refers to assigning permission to use the
device’s various functions.
In order to configure the LDAP server, you will have to complete the following
procedures: 1) Install the Windows Server Support Tools; 2) Install the Active
Directory Schema Snap-in; and 3) Extend and Update the Active Directory
Schema.
To allow authentication and authorization for the KN1000 via LDAP / LDAPS,
refer to the information in the following table. For further information, please
see the ATEN website at www.aten.com