User manual

3. Browser Login

PON Port Setting

This section allows you to configure the KN1000’s PON port for connecting a

PN0108 (8-port Power Over the NET™) or a 2-wire RS-232 interface.

PON Device

Enable this radio button if you want to connect a PN0108 (8-port Power Over

the NET™) to the KN1000’s PON port. If a Power over the Net™ module is

connected to your installation, click Download PON Client to download the

KN1000‘s power management software for the attached PON device.

Enable 2-Wire RS232

Enable this radio button to use the PON port for a serial console. When this

option is selected, a menu window appears for the serial communication

parameters, as below:

Note: These settings will be the same as those in the KN1000’s serial console

section. See the Serial Console section under Console Management,

page 59, for further details.

(Continues on next page.)