User manual

159
PPP Modem Operation
Basic Setup
In addition to the browser and AP methods, the KN1000 can also be accessed
through its RS-232 port using a PPP dial-in connection, as follows:
1. Set up your hardware configuration to match the diagram, below:
:
2. From your computer, use your modem terminal program to dial into the
KN1000’s modem.
Note: 1. If you don’t know the KN1000 modem’s serial parameters, get
them from the KN1000 administrator.
2. An example of setting up a modem terminal program under
Windows XP is provided on the next page.
3. Once the connection is established, open your browser, and specify
192.168.192.1 in the URL box.
From here, operation is the same as if you had logged in from a browser or with
the AP programs.
Remote
Operator
Modem Modem
Phone Line
Serial Modem Cable Serial Modem Cable