User manual

6. The JavaClient Viewer
111
Control Panel Functions
The Control Panel functions are described in the table below:
Icon Function
This is a toggle. Click to make the Control Panel persistent – i.e., it
always displays on top of other screen elements. Click again to have
it display normally.
Click to bring up the Macros dialog box (see Macros, page 113 for
details).
Click to bring up the Video settings dialog box. Right-click to perform
a quick Auto Sync (see Video Settings, page 115, for details).
Click to perform a video and mouse autosync operation. It is the
same as clicking the Auto-sync button in the Video Options dialog
box (see Video Settings, page 115).
Toggles the display between Full Screen Mode and Windowed Mode.
Click to take a snapshot (screen capture) of the remote display.
See Snapshot, page 105, for details on configuring the Snapshot
parameters.
Click to bring up the Message board (see page 116).
Click to send a Ctrl+Alt+Del signal to the remote system.
Click to toggle the remote display between grayscale and color.
Click to bring up the Virtual Media dialog box. The red X indicates
that the function has not been started. The icon changes when a
virtual media device is started to indicate the type of device being
used. See Virtual Media, page 118, for specific details.
Click to zoom the remote display window.
Note: This feature is only available in windowed mode (Full Screen
Mode is off). See Zoom, page 118, for details.
Click to bring up the on-screen keyboard (see The On-Screen
Keyboard, page 119).