User manual

KM0832 User Manual

Upgrade Failed

If a device fails to complete the upgrade successfully, start the firmware

upgrade procedure again (see p. 64).

Firmware Upgrade Recovery

If the firmware upgrade procedure is aborted prematurely (due to a power

outage, for example), the switch that was being upgraded at the time may

become inoperable, and may be incapable of accepting a normal firmware

upgrade.

To recover from a failed firmware upgrade:

1. Slide the unit's Firmware Upgrade Recovery Switch (see p. 8), to the

RECOVER position.

2. Perform a system reset (see System Reset Button on p. 7). The switch is

now ready to be upgraded.

3. Slide the Recovery Switch back to the NORMAL position.

4. Start the firmware upgrade procedure again (see p. 64).