User manual

Chapter 3. Administrator Utility

6. Select or deselect Check Firmware Version.

 If you select Check Firmware Version, the Utility compares the

firmware level of the KM0832 with that of the upgrade files. If it finds

that the current firmware version of the KM0832 is higher, a dialog

box appears that gives you the option to Continue or Cancel.

 If you do not select Check Firmware Version, the Utility installs the

upgrade files without comparing the version levels.

7. Click Upgrade to begin upgrading the firmware.

-or-

Click Abort to cancel the firmware upgrade. You must power off and then

power on the KM0832.

Note: It takes approximately 7 minutes to upgrade the firmware for a single

stage installation, or 17 minutes for a cascaded installation. Please be

patient while the firmware is upgrading.

8. After the firmware upgrade completes, log out to reset the KM0832.