User manual

Chapter 3. Administrator Utility

IP Address

The KM0832 has the option to manually enter a static IP address or to use a

DHCP server on your network to dynamically assign an IP address.

To use a DHCP server to assign an IP address:

 Under DHCP enabled, click Ye s to use a DHCP server.

To manually assign an IP address:

1. Under DHCP enabled, click No.

2. In the fields under Manual IP address, enter the IP address, subnet mask,

default gateway, and primary DNS server. You also can enter an alternate

DNS server; however, it is not required.

Hint: If you enable a DHCP server to assign an IP address to the KM0832,

you should also enable Mail Notification so that the KM0832 can send

an e-mail message to notify the recipient when the IP address changes.

Port Settings

You must enter the network ports that the KM0832 will use to transfer

webpages and communicate with client programs. Typically, port 80 is used

for Hyper Text Transfer Protocol (HTTP) communications, while port 443 is

used for HTTPS (HTTP over Secure Socket Layer).

Note: You must assign a port number for each field. Otherwise, the KM0832

will not function correctly.