User manual

Chapter 3. Administrator Utility
29
Logging In
The browser-based KM0832 Administrator Utility is provided to configure
settings for the KM0832.
The first time that the KM0832 is accessed, the default Super Administrator
account must be used to log in. The default username is ADMIN and the default
password is also ADMIN. This account cannot be deleted and it does not appear
in the username list. The username cannot be changed; however, the password
can be changed. ATEN strongly recommends that you change the password
immediately; otherwise, your KVM switch and all connected servers are
vulnerable to access by unauthorized users. See Configuring OSD User
Settings, page 60, to change the default password.
Note: After other user accounts have been added to the KM0832, it is no
longer necessary to use the default Super Administrator account to log
in.
To log in to the KM0832 Administrator Utility:
1. Enter the IP address for the KM0832 in the address bar of a browser and
press Enter. The KM0832 Login screen appears.
2. Enter your username and password, and then click Login. (The username
is not case-sensitive; however, the password is case-sensitive.)
(continues on next page)