User manual

KM0832 User Manual
12
Before you Begin
Rack Mounting
The KM0832 can be mounted in 1U of rack space. If you do not wish to rack
mount the unit, see Optional Desktop Installation, page 107.
Standard Rack Mounting
1. Remove the four screws from the sides of the unit, two at the front and two
at the rear. The two screws at the front secure the detachable front panel to
the chassis.
1. Important safety information regarding the placement of this
device is provided on page iv. Please review it before proceed-
ing.
2. Make sure that power to all devices you will be connecting has
been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
Phillips hex head
M3 x 6