User manual

KM0832 User Manual

KM0832 Rear View

1. Power Socket

The power cord to the AC source plugs in here.

2. Power Switch

This is a standard rocker switch that powers the station on and off.

3. Configuration Port

The KM0832 is connected to the LAN via the Configuration Port. It

provides access to the KM0832 Administrator Utility to configure the

switch, create and manage user and group accounts, set device access

permissions, upgrade firmware, etc.

4. Firmware Upgrade Recovery Switch

During normal operation and while performing a firmware upgrade, this

switch should be in the NORMAL position. See p. 66 for firmware

upgrade recovery details.

5. Daisy Chain Port

When daisy chaining stations (see p. 22), this Chain Out port is used to

connect the lower stations in the chain.

Note: If this feature is not operative on your unit, you will need a newer

version of the firmware. Contact your dealer for details.

2 3 4