User manual

KM0832 User Manual
106
Factory Default Settings
The factory default settings are as follows:
Setting Default
View Mode Accessible + Powered
Port ID Display Mode The Port Number plus the Port Name
Port ID Display Position Upper Left Corner
Port ID Display Duration User Defined (3 seconds)
Scan Duration 5 seconds
Scan Mode Accessible + Powered
OSD Hotkey [Scroll Lock] [Scroll Lock]
Logout Timeout 0 (Disabled)
Screen Blanker 0 (Disabled)
Hotkey Command Mode On (Enabled)
Beeper On (Activated)
Idle Timeout 5 seconds
Port Note None
Port Operating System Windows (PC compatible)
Port Language U.S. English
Port Access None (Super Administrators and Administrators have
full access)
Webpage Session Timeout 30 minutes
IP Address 192.168.0.10
Subnet Mask 255.255.255.0
Default Gateway 192.168.0.254
HTTP Port 80
HTTPS Port 443
DHCP Enabled No (Disabled)
SMTP Server Mail Notification No (Disabled)
Date & Time Synchronize with my computer
Daylight Saving Time Enabled