User manual

Chapter 5. Hotkey Operation
101
Hotkey Beeper Control
The Beeper (see SET BEEPER, p. 84) can be Hotkey toggled On and Off. To
toggle the Beeper, key in the following Hotkey combination:
1. Invoke HKM (see p. 97).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line displays
Beeper On or Beeper Off for one second; then the message disappears and you
automatically exit HKM.
Hotkey Summary Table
[Num Lock] + [ * ]
or
[Num Lock] + [ - ]
[Port ID] [Enter] Switches access to the computer that
corresponds to that Port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n
seconds—where n is a number from 1–
255.
[A] Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P] or
Left Click pauses Auto Scanning.
When Auto Scanning is paused, pressing
Any Key or another Left Click resumes
Auto Scanning.
[←] Skips from the current port to the first
accessible port previous to it.
[→] Skips from the current port to the next
accessible port.
[B] Toggles the Beeper On or Off.