User manual

Chapter 4. OSD Operation
85
F4: ADM
F4 is a Super Administrator and Administrator only function. It allows them to
configure and control the overall operation of the OSD.
Note: When creating user accounts you must add each user to a group.
Therefore, we suggest that you create groups before users. If you do not
wish to create groups you may add users to the default group account.
However, the default group account cannot be used to grant port access
to group members. In this case, you must individually add users to the
port(s).
ACCOUNT MANAGEMENT
(continues on next page)
Setting Function
CREATE GROUP Opens the NEW GROUP NAME field. Enter a name for the new
group, and then press [Enter]. The group name may be up to 15
characters long, and can consist of any combination of letters
and numbers (A–Z, 0–9).
MODIFY GROUP Lists all groups. Select the group name that you wish to modify.
Edit the group name, and then press [Enter].
DELETE GROUP Lists all groups. Select the group name that you wish to delete.
Press [Y] to confirm; or, press [N] to cancel.
CREATE USER
ACCOUNT
1. The group list appears.
2. From the list, select the group to which you wish to add the
new user.
3. Enter a username and a password for the account; reenter
the password to confirm it, and then press [Enter]. The user-
name and password may be up to 15 characters long, and
can consist of any combination of letters and numbers (A–Z,
0–9). The User Type list appears.
4. Select a User Type for the account: User (NORMAL USER),
Administrator (ADM), or (SUPER ADM). (Only Super Admin-
istrators can grant Super Administrator user rights to other
users.)