User manual

Chapter 6. The Firmware Upgrade Utility

 As the Upgrade proceeds, status messages appear in the Status

Messages panel, and the progress toward completion is shown on the

Progress bar.

 As each device update completes, its status is reported in the Status

Messages panel.

 When a device group upgrade is successful, the background behind the

device group name changes to pink to indicate so; if a member of a

device group fails to upgrade successfully, the background behind the

device group name changes to red to indicate that there was an upgrade

failure in the group. Check the Status Messages to ascertain which

device failed to upgrade.

5. When all devices have been upgraded, click Finish to close the Firmware

Upgrade Utility.

km0216-0432.book Page 61 Wednesday, April 14, 2010 3:17 PM