User manual

KM0216 / KM0432 User Manual

(Continued from previous page.)

The Utility inspects your installation. The devices capable of being

upgraded by the package are listed in the Device List panel.

Note: 1. Although only one device type is shown in the list (KA9220, for

example), all units of that type receive the upgrade.

2. KM0432U and KM0432N refer to two different upgradable ICs

on the chained KM0432 devices.

3. A blue background behind the device name indicates that it is

ready to be upgraded.

4. When all devices to be upgraded are displayed in the Device List panel,

click Next to start the upgrade.

If you enabled Check Firmware Upgrade, the Utility compares the

device's firmware level with that of the upgrade files. If it finds that the

device's version is higher, it brings up a dialog box informing you of the

situation and gives you the option to Continue or Cancel.

If you didn't enable Check Firmware Upgrade, the Utility installs the

upgrade files without checking their version level.

 While a device group is being upgraded, the background behind its

name changes to green and blinks on and off to indicate that upgrading

for that device group is in progress.

km0216-0432.book Page 60 Wednesday, April 14, 2010 3:17 PM