User manual

Chapter 2. Hardware Setup
25
3. Use KVM cable sets (as described in the Cables section of the cascaded
KVM switch's user manual) to connect any available KVM port on the
Second Stage unit to the keyboard, video, and mouse ports of the computer
you are installing.
4. Plug the Second Stage unit's power cord into the unit's power socket; then
plug it into an AC source.
5. Repeat this procedure for any additional Second Stage units you are
installing.
6. Power on the KM0216 / KM0432, then power on the Second Stage unit(s).
7. After all the KVM switches are powered on, then power on the attached
computers.
Cascaded Installation Diagram
KH88
KA9120
Console Module
KM0432
This product supports several console
module and KVM adapter cable types.
See Requirements, page 3, and KVM
Adapter Cable Installation Diagrams,
page 20, for details.
km0216-0432.book Page 25 Wednesday, April 14, 2010 3:17 PM