User manual

Chapter 1. Introduction
9
No. Component Description
1 Power Socket The power cord to the AC source plugs in here.
2 Power Switch This is a standard rocker switch that powers the KVM switch
on and off.
3 Daisy-chain Ports When daisy-chaining stations (see page 21), the daisy-chain
cables plug in here.
The upper port is the Chain In port; the lower one is the
Chain Out port. The Chain In port is not used on the Master
(First Stage) unit.
4 Grounding
Terminal
The grounding wire used to ground the unit attaches here.
5 Firmware
Upgrade Port
The Cat 5 cable that transfers the firmware upgrade data
from the administrator's computer to the KM0216 / KM0432
plugs into this RJ-45 connector (see page 57).
6 User Ports The Cat 5 cables from the console modules plug in here.
7 KVM Ports The Cat 5 cables that link the KVM adapter cables to the
KM0216 / KM0432 plug in here.
km0216-0432.book Page 9 Wednesday, April 14, 2010 3:17 PM