Instruction manual

(F4 ADM: continued)
Setting Function
SET LOGOUT
TIMEOUT
If there is no input from the console for the amount of time
specified with this function, the currently logged in User is
automatically logged out. A login is necessary before the
console can be used again.
This enables other Users to access the computers when the
original User is no longer accessing them, but has not logged
out.
To set the timeout value, key in a number from 1 - 180
minutes, then press [Enter]. If the number is 0 [zero], this
function is disabled. Default is 0 (disbabled).
EDIT PORT
NAMES
To help remember which computer is attached to a particular
port, every port can be given a name. This function allows the
Administrator to create, modify, or delete port names. To Edit
a port name:
1. Click the desired port, or use the Navigation Keys to move
the highlight bar to it, then press [Enter].
2. Key in the new Port Name, or modify/delete the existing
one. The maximum number of characters is 12. Legal
characters include:
w All alpha characters: a - z; A - Z
w All numeric characters: 0 - 9
Port names are not case sensitive. The Port Names
display as all capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to save your
changes. To cancel, press [Esc].
RESTORE
DEFAULT
VALUES
This function undoes all changes (except for the Port Names,
which are saved) and returns the setup to the original factory
default settings (see FACTORY DEFAULT SETTINGS, p.
1-48).
CLEAR THE
NAME LIST
This function undoes all changes - including erasing the Port
Names - and returns the setup to the original factory default
settings.
(Table continues on next page)
2003-07-25
32