Instruction manual

F4 ADM:

F4 allows the Administrator to configure and control the overall operation of

the OSD. After you select an item from the ADM menu, a submenu with fur-

ther choices appears. An icon indicates which choice is currently selected .

The setting options are explained in the following table:

Setting Function

SET

USERNAME

AND

PASSWORD

This function sets Usernames and Passwords for the Administrator

and four Users. After selecting the Administrator field or one of the

User fields, a screen that allows you to key in a username and

password appears:

1. Key in a unique username and password. The username and

password may be up to 15 characters, and can consist of any

combination of letters and numbers.

2. Re-enter the password in the Confirm field, then press [Enter].

To modify or delete a previous Username and/or Password, use the

Backspace key to erase unwanted characters.

The Administrator must enter Usernames and Passwords for all four

Users - even if there are less than four Users. If this isn’t done, any

user can log in without entering a Username and Password.

In case the Administrator forgets his password, or if it becomes

corrupted, refer to the Clear Login Information section, p. 51.

(Table continues on next page)

SET USERNAME AND PASSWORD

SET LOGOUT TIMEOUT : OFF

EDIT PORT NAMES

RESTORE DEFAULT VALUES

CLEAR THE NAME LIST

ACTIVATE BEEPER (OFF)

SET QUICK VIEW PORTS

SET ACCESSIBLE PORTS

ESC : EXIT : UP

ENTER : SELECT : DOWN

ADMINISTRATOR

F4 : ADM

2003-07-25