Instruction manual

F3 SET:

SET allows the Administrator and each User to set up his own working environ-

ment. A separate profile for each is stored by the OSD and is activated accord-

ing to the Username that was entered during Login.

To change a setting:

1. Double Click it; or move the highlight bar to it, then press [Enter].

2. After you select an item, a submenu with further choices appears. To make

a selection, either Double Click it; or move the Highlight Bar to it, then

press [Enter]. An icon appears before the selected choice to indicate which

one it is.

The settings are explained in the following table:

OSD HOTKEY

PORT ID DISPLAY

PORT ID DISPLAY DURATION

PORT ID DISPLAY MODE

SCAN DURATION: 5 SEC

SCAN/SKIP MODE

SCREEN BLANKER: 10

HOTKEY COMMAND MODE

ESC : EXIT : UP

ENTER : SELECT : DOWN

ADMINISTRATOR

F3 : SET

2003-07-25