Instruction manual

Note: 1. The diagram depicts the Administrator’s Main Screen. The F4 and F6
functions are reserved for the Administrator and do not appear on the
Users’ Main Screen.
2. OSD always begins in LIST view, with the highlight bar at the same
position it was in the last time the OSD was closed.
3. Only the ports that have been set accessible by the Administrator for
the currently logged in User are visible (see SET ACCESSIBLE
PORTS, p. 33, for details).
OSD Navigation
Use the following methods to navigate the OSD:
w To dismiss the menu, and deactivate OSD, Click the X at the upper right
corner of the OSD Window; or press [Esc].
w To Logout, Click F8 or the
Z
Z
Z
symbol at the top of the Main Screen, or
press [F8].
w To move up or down through the list one line at a time, Click the Up / Down
Triangle symbols (
▲▼) or use the Up / Down Arrow Keys. If there are more
list entries than there is room for on the Main Screen, the screen will scroll.
w To move up or down through the list one screen at a time, Click the Up /
Down Arrow symbols (éê), or use the [Pg Up] / [Pg Dn] keys. If there are
more list entries than there is room for on the Main Screen, the screen will
scroll.
w To activate a port, Double Click it in the list, or move the Highlight Bar to it
then press [Enter].
w After executing any action, you automatically go back to the menu one level
above.
2003-07-25
24