Instruction manual

3. For additional KH0116 switches, use daisy chain cable sets to connect the

Chain Out port of the parent KH0116 to the Chain In port of the child

(Second Station Out to Third Station In, Third Station Out to Fourth Station

In, etc.).

4. Use KVM cable sets (described in the Cables section, p. 5), to connect any

available CPU Port to the Keyboard, Video and Mouse ports of the

computers you are installing.

5. Power up the installation as follows:

a. Power on the First Station.

b. Power on each Station in turn (Second Station, then Third Station, etc.).

In each case, wait for the Station ID to be displayed on the Station ID

LED before powering on the next station. (The Station ID for the Second

Stage unit is 02, the ID for the Third Stage unit is 03, etc.)

c. After all the Stations are up, power on the computers.

2003-07-25