Instruction manual

9. Reset Switch

Pressing this switch in performs a system reset. This switch is recessed and

must be pushed with a thin object - such as the end of a paper clip, or a

ballpoint pen.

10. LCD Display Controls

w Buttons to control the position and picture settings of the LCD display

are located here, as well as a buton to Enable/Disable operating the

KL0116 from an optional remote console. See the Remote Console

Operation chapter (p. 45) and the LCD Operation section (p. 50) for

details.

w The Local and Remote LEDs light to indicate that their respective

consoles are active.

2003-07-25