Instruction manual

37
Please make sure this documentation and the KVM switches are placed
separately and all in secured locations to avoid security breaches.
F5 SKP:
To activate the SKP function, press [F5] or click the F5 menu option
located at the top of the Main Menu screen.
SKP enables you to easily skip forward or backward, switching the console
focus from the current active computer port to the next or previous
available computer port.
The following lists additional SKP function features:
• The F3 SET function (see page 29) determines which computers are
available for Skip Mode switch selection.
• To navigate in Skip Mode, do any of the following:
• Press [  ] to switch to the previous computer in the list.
• Press [  ] to switch to the next computer in the list.
• Press [  ] to switch to the last computer on the previous KVM station in
the list.
• Press [  ] to switch to the first computer on the next KVM station in the
list.
NOTE: When you Skip, you only Skip to the previous or next available computer that
is in the Scan/Skip Mode selection.
• When you select a port for Scan/Skip Mode, a left/right triangle symbol
appears to the left of the Port ID.
• The console does not function normally while in Skip mode. You must
exit Skip mode to regain console control.
• To exit Skip mode press [Spacebar] or [Esc].
F6 BRC:
To activate the BRC function, press [F6] or click the F6 menu option
located at the top of the Main Menu screen.
BRC is an Administrator function that enables Broadcast mode (BRC). In
Broadcast mode, commands sent from the console broadcast to all
available computers on the installation.
35