Instruction manual

KL0116 Front View

1. Handle

• Pull the handle to slide the KVM module out. Push to slide the module in.

2. LCD Screen

• After sliding the KVM module out, flip the cover to access the LCD monitor.

3. Port LEDs

• Each port LED provides status information about corresponding CPU ports. The top

LED row corresponds to Port 1- 8 and the bottom LED row to Ports 9 - 16. Each Port

consists of a left and right LED pair: On Line LED (left port) and Selected Port LED

(right port). The following describes the LED light indicators:

- A GREEN On Line LED indicates the corresponding attached computer port is

up and running

- A RED Selected LED indicates the corresponding attached computer has the KVM

focus. Under normal conditions, the LED is steady. When accessing its port under

Auto Scan Mode (see page 21) the LED flashes.

- Each time the KL0116 powers on, the Switch performs a self-test. The On Line and

Selected LEDs blink once in succession during the self-test.

4. Keyboard

5. Power LED

• The Power LED lights blue when the KL0116 powers up and is ready to operate

6. Rack Mounting Brackets

• Rack mounting brackets are included to secure the chassis to a system rack