User manual

Chapter 3. OSD Operation

(Continued from previous page.)

(Continues on next page.)

Setting Function

EDIT PORT

NAMES

To help remember which computer is attached to a particular port,

every port can be given a name. This function allows the

Administrator to create, modify, or delete port names. To Edit a port

name:

1. Click the port you want, or use the Navigation Keys to move the

highlight bar to it, then press [Enter].

2. Key in the new Port Name, or modify/delete the old one. The

maximum number of characters allowed for the Port Name is

15. Legal characters include:

 All alpha characters: A - Z

 All numeric characters: 0 - 9

 + - / : . and Space

Case does not matter; the OSD displays the Port Name

in all capitals no matter how they were keyed in.

3. When you have finished editing, press [Enter] to have the

change take effect. To abort the change, press [Esc].

RESTORE

DEFAULT

VALUES

This function is used to undo all changes and return the setup to

the original factory default settings (see OSD Factory Default

Settings, page 52) - except for the Names settings that were

assigned to the Ports, which are saved.

CLEAR THE

NAME LIST

This function clears the port name list.

ACTIVATE

BEEPER

Choices are:

Y (for ON), or

N (for OFF).

When activated, the beeper sounds whenever a Port is changed;

when activating the Auto Scan function (see F7 SCAN, p. 34); or

an invalid entry is made on an OSD menu. The default is Y

(activated).