Installation Instructions Instruction Manual

ManualsBrandsAltronix ManualsAccessories for electricalWPTV248ULCB

WPTV248UL Series

CCTV Outdoor Power Supplies

Installation Guide

Models Include:

• WPTV248UL • WPTV248ULCB

- 24VAC @ 3.5 amp (85VA). - 24VAC @ 3.5 amp (85VA).

- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.

• WPTV248175UL • WPTV248175ULCB

- 24VAC @ 7 amp (175VA) - 24VAC @ 7 amp (175VA)

or 28VAC @ 6.25 amp (175VA). or 28VAC @ 6.25 amp (175VA).

- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.

• WPTV248300UL • WPTV248300ULCB

- 24VAC @ 12.5 amp (300VA) - 24VAC @ 12.5 amp (300VA)

or 28VAC @ 10 amp (280VA). or 28VAC @ 10 amp (280VA).

- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.

Rev

. 021104

Summary of content (8 pages)

PAGE 1
WPTV248UL Series CCTV Outdoor Power Supplies Installation Guide Models Include: • WPTV248UL - 24VAC @ 3.5 amp (85VA). - Eight (8) Fuse Protected Outputs. • WPTV248175UL - 24VAC @ 7 amp (175VA) or 28VAC @ 6.25 amp (175VA). - Eight (8) Fuse Protected Outputs. • WPTV248300UL - 24VAC @ 12.5 amp (300VA) or 28VAC @ 10 amp (280VA). - Eight (8) Fuse Protected Outputs. • WPTV248ULCB - 24VAC @ 3.5 amp (85VA). - Eight (8) PTC Protected Outputs. • WPTV248175ULCB - 24VAC @ 7 amp (175VA) or 28VAC @ 6.25 amp (175VA).
PAGE 2
Overview: These outdoor Altronix CCTV Power Supplies provide power via eight (8) fused or PTC protected outputs for CCTV Cameras, heaters and other video accessories. Units are UL Listed UL2044 “U.S. and Canada for CCTV Equipment.
PAGE 3
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the output voltage. 8. Connect devices to terminals marked [1P - 1N through 8P - 8N] on PD8/PD8CB board (Figs. 2-4, pgs. 5-7), carefully observing polarity. 9. Slide switch on PD board to ON position for models WPTV248UL and WPTV248ULCB (Fig. 2, pg. 5). Turn main switch on all other models to the ON (RESET) position (Figs. 3-4, pgs. 6-7). 10. Green LED will illuminate when unit is powered. 11.
PAGE 4
Fig.
PAGE 5
Fig. 2 WPTV248UL • WPTV248ULCB Fig. 2A F7 F8 PD8 P MAIN FUSE F6 1 2 3 4 5 6 7 8 PD8 P D1 FUSED POWER OUTPUTS R1 N D1 LED FUSED POWER POWER OUTPUTS N INPUT COMMON OFF F5 ON F4 ALTRONIX CORP. MADE IN USA BROOKLYN, NY 11220 F3 MAIN FUSE F2 OFF F1 ON ALTRONIX CORP.
PAGE 6
Fig. 3 WPTV248175UL • WPTV248175ULCB F1 F2 F3 F4 F5 F6 F7 MAIN FUSE ALTRONIX CORP. MADE IN USA BROOKLYN, NY 11220 Used on PTC Models (example: WPTV248175ULCB) F8 PD8 P D1 FUSED POWER LED R1 OUTPUTS N INPUT COMMON POWER OUTPUTS N P S non-power limited Power Switch Power Limited Class 2 White Lead XFMR 115VAC Input 50/60 Hz. Green Lead (Ground) Terminal Blocks for Fig. 3 24VAC or 28VAC fused or PTC protected outputs 1 through 8. Input: 24VAC or 28VAC operation.
PAGE 7
Fig. 4 WPTV248300UL • WPTV248300ULCB F1 F2 F3 F4 F5 F6 F7 MAIN FUSE ALTRONIX CORP. MADE IN USA BROOKLYN, NY 11220 Used on PTC Models (example: WPTV248300ULCB) F8 PD8 P D1 FUSED POWER LED R1 OUTPUTS N INPUT COMMON POWER OUTPUTS N P S non-power limited Power Limited Class 2 Power Switch Black Lead White Lead XFMR* Green Lead (Ground) Terminal Blocks for Fig. 4 24VAC or 28VAC fused or PTC protected outputs 1 through 8. Input: 24VAC or 28VAC operation.
PAGE 8
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated “DANGEROUS VOLTAGE” within the products enclosure that may be of sufficient magnitude to constitute an electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.