Installation Guide

WayPoint5CEV - 3 -
Fig. 2
Bottom of Enclosure
Suggested Locations
for Wiring Inlets
Pole Installation Using Optional Pole Mount Kit PMK1
PMK1 is intended for use with all Altronix outdoor rated power supplies. This product is designed for use with the supplied
Wormgear Quick Release Straps. The 39” Wormgear Quick Release Straps included with PMK1 can be used on poles up to
8” (203.2mm) in diameter. Poles wider than this will require longer straps (not supplied).
1. Thread one (1) wormgear quick release strap through the slots on the back of a mounting bracket (Fig. 3).
2. Once the desired height of the top Pole Mount bracket is achieved, tighten the straps down by sliding open end
of the strap through the locking mechanism on the strap, then tighten the screw with flat head screwdriver or
5/16” hex socket driver (Figs. 3a and 3b).
Fig. 3 Fig. 3a Fig. 3b
3. Attach the bottom bracket to the enclosure by inserting bolts through the flange of the enclosure and into the bracket,
tightening bolts with a 7/16” hex socket (Fig. 3c).
4. Thread the second wormgear quick release strap through the slots on the back of the bottom mounting
bracket (Fig. 3).
5. Mount enclosure onto the top bracket by inserting bolts through flange of the enclosure and into the bracket,
tightening bolts with a 7/16” hex socket (Fig. 3c).
6. Tighten the straps of the bottom bracket down by sliding the open end of the strap through the locking mechanism
on the strap, then tighten screw with flat head screwdriver or 5/16” hex socket driver (Fig. 3d).
7. Clip excess straps.
Fig. 3c Fig. 3d
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the
presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient
magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure. There are
no user serviceable parts inside. Refer servicing to qualified service personnel.