Installation Guide

- 2 - WayPoint30A Series
Overview:
Altronix WayPoint Outdoor Power Supplies provide 24VAC and/or 28VAC distributed via two (2), four (4) or
eight (8) outputs for powering CCTV cameras, heaters, and other video accessories.
WayPoint30A Series AC Reference Chart:
Altronix
Model Number
Output Voltage
Total
Output
Current
(Power)
Number
& Type
of
Outputs
Fuse
Output
Ratings
PTC
Output
Ratings
Input Current Draw
Product
Weight
115VAC
60Hz
230VAC
50Hz
WayPoint30AU
24VAC 12.5A
2
10A/
32V
–
3.0A 1.5A
4.68kg28VAC 10A
24VAC and 28VAC 10A 1 of each
WayPoint30ADU
24VAC 12.5A
2
– 9A 4.68kg28VAC 10A
24VAC and 28VAC 10A 1 of each
WayPoint30A4U
24VAC 12.5A
4 Fused
10A/
32V
– 4.68kg
28VAC 10A
WayPoint30A4DU
24VAC 12.5A
4 PTCs – 2.5A 4.68kg
28VAC 10A
WayPoint30A8U
24VAC 12.5A
8 Fused
5A/
32V
– 4.8kg
28VAC 10A
WayPoint30A8DU
24VAC 12.5A
8 PTCs – 2.5A 4.8kg
28VAC 10A
*Lower rated fuses can be used.
Specifications:
Installation Instructions:
Unit shall be installed in accordance with The National Electrical Code and all applicable Local Regulations.
1. Remove back plane from enclosure prior to mounting (do not discard hardware).
2. Mark and drill desired inlets on the enclosure to facilitate wiring (Fig. 1, pg. 3).
3. Mount unit in desired location. Mark and drill holes to line up with the top and bottom holes of the
enclosure flange. Secure enclosure with appropriate fasteners (Fig. 5, pg. 7 and Fig. 11, pg. 8).
4. Mount back plane to enclosure with hardware.
5. Set the input voltage selector switch for 115VAC or 230VAC operation (Figs. 2-4, pgs. 4-6)
6. To facilitate wire entry utilize weather-tight NEMA 4 rated connectors, bushings, and cable.
7. Set illuminated master power disconnect circuit breaker to the [OFF] position (Figs. 2-4, pgs. 4-6).
8. Connect unswitched AC power (115VAC/230VAC 50/60 Hz) to terminals marked [L, N]
(Figs. 2-4, pgs. 4-6). Green branch wire connects to earth (safety) ground lug .
Wire gauge range of connectors is 14 AWG to 11 AWG (1.6 mm to 2.5 mm diameter).
9. Set illuminated master power disconnect circuit breaker to the (RESET/ON) position (Figs. 2-4, pgs. 4-6).
10. WayPoint30A4U/A4DU, WayPoint30A8U/A8DU are factory set for 24VAC operation.
For 28VAC operation adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].
Agency Listings:
• UL/cUL Listed:
UL 60950-1 Information Technology Equipment.
UL 60950-22 Equipment to be Installed Outdoors.
• CE European Conformity.
Input:
• Input: 115VAC, 60Hz, 3A or 230VAC, 50Hz, 1.5A.
Output:
• Output options:
a. 24VAC or 28VAC.
b. Both 24VAC and 28VAC
(WayPoint30AU/ADU only).
• Fuse ratings:
WayPoint30AU and WayPoint30A4U: 10A
WayPoint30A8U: 5A.
Visual Indicators:
• Individual power output LED indicators.
• Illuminated master power switch.
Features:
• Surge suppression.
• Spare fuses included.
Accessories:
• Optional PMK1 Pole Mount Kit simplifies
installation of outdoor units.
Enclosure:
• NEMA 4/4X, IP66-11 Rated enclosure for
outdoor use.
• Enclosure Dimensions (H x W x D approx.):
13.31” x 11.31” x 5.59”
(338.1 mm x 287.3 mm x 142 mm).
XFMR*
INPUT
CAUTION
HIGH VOLTAGE
COM 24V 28V
COM 24V 28V
28V 24V COM
PD2WP
Input Voltage
Power Input
115V
115 230
LG N
10
10
10
10
Ground
Lug
ALTRONIX CORP.
www.altronix.com
BROOKLYN, NY 11220
PD2WP
COM 24V 28V
COM 24V 28V
28V 24V COM
Input Voltage
Power Input
115V
115 230
LG N
ALTRONIX CORP.
www.altronix.com
BROOKLYN, NY 11220
Circuit board incorporated
in WayPoint30ADU (PTCs)