Installation Guide

ManualsBrandsAltronix ManualsComputers & Accessories8 PTC Outputs CCTV Power Supply, Outdoor, 24/28VAC @ 7.25A, WP3 Enclosure

- 2 - WayPoint17A Series

Overview:

Altronix WayPoint Outdoor Power Supplies provide 24VAC and/or 28VAC distributed via two (2), four (4) or

eight (8) outputs for powering CCTV cameras, heaters, and other video accessories.

WayPoint17A Series AC Reference Chart:

Altronix

Model Number Output Voltage

Total

Output

Current

(Power)

Number

and Type

of Outputs

Fuse

Output

Ratings

PTC

Output

Ratings

Input Current Draw

Product

Weight

115VAC

60Hz

230VAC

50Hz

WayPoint17AU

24VAC 7.25A

5A/

32V*

-----

2.0A 1A

5.95kg28VAC 6.25A

24VAC and 28VAC 6.25A 1 of each

WayPoint17ADU

24VAC 7.25A

----- 2.5A 5.95kg28VAC 6.25A

24VAC and 28VAC 6.25A 1 of each

WayPoint17A4U

24VAC 7.25A

4 Fused

5A/

32V*

----- 5.95kg

28VAC 6.25A

WayPoint17A4DU

24VAC 7.25A

4 PTCs ----- 2.5A 5.95kg

28VAC 6.25A

WayPoint17A8U

24VAC 7.25A

8 Fused

5A/

32V*

----- 6.1kg

28VAC 6.25A

WayPoint17A8DU

24VAC 7.25A

8 PTCs ----- 2.5A 6.1kg

28VAC 6.25A

*Lower rated fuses can be used.

Specifications:

Installation Instructions:

Unit shall be installed in accordance with The National Electrical Code and all applicable Local Regulations.

1. Remove backplane from enclosure prior to mounting (do not discard hardware).

2. Mark and drill desired inlets on the enclosure to facilitate wiring (Fig. 1, pg. 4).

Note: Inlets for conduit fittings should only be made on the bottom of the enclosure.

UL Listed NEMA type 4X rated conduit connector/hubs shall be used for the appropriate size inlets.

3. Mount unit in desired location. Mark and drill holes to line up with the top and bottom holes of the

enclosure flange. Secure enclosure with appropriate fasteners (Fig. 5, pg. 7 and Fig. 11, pg. 8).

4. Mount back plane to enclosure with hardware.

5. Set the input voltage selector switch for 115VAC or 230VAC operation (Figs. 2-4, pgs. 4-6)

6. To facilitate wire entry utilize weather-tight NEMA 4 rated connectors, bushings, and cable.

7. Set illuminated master power disconnect circuit breaker to the [OFF] position (Figs. 2-4, pgs. 4-6).

8. Connect unswitched AC power (115VAC/230VAC, 50/60 Hz) to terminals marked [L, N]

(Figs. 2-4, pgs. 4-6). Green branch wire connects to earth (safety) ground lug .

Wire gauge range of connectors is 14 AWG to 11 AWG (1.6 mm to 2.5 mm diameter).

9. Set illuminated master power disconnect circuit breaker to the [RESET/ON] position (Figs. 2-4, pgs. 4-6).

Agency Listings:

• UL/cUL Listed:

UL 60950-1 Information Technology Equipment.

UL 60950-22 Equipment to be Installed Outdoors.

• CE European Conformity.

Input:

• Input: 115VAC, 60Hz, 2A or 230VAC, 50Hz, 1A.

Output:

• Output options:

a. 24VAC or 28VAC.

b. Both 24VAC and 28VAC

(WayPoint17AU/ADU only).

• Fuse ratings:

WayPoint17A Series incorporate 5A/32V fuses.

Visual Indicators:

• Individual power output LED indicators.

• Illuminated master power switch.

Features:

• Surge suppression.

• Spare fuses included.

Accessories:

• Optional PMK1 Pole Mount Kit simplifies

installation of outdoor units.

Enclosure:

• NEMA 4/4X, IP66-11 Rated enclosure for

outdoor use.

• Enclosure Dimensions (H x W x D approx.):

13.31” x 11.31” x 5.59”

(338.1 mm x 287.3 mm x 142 mm).

CAUTION

HIGH VOLTAGE

COM 24V 28V

28V 24V COM

PD2WP

Input Voltage

Power Input

115V

115

230

LG N

28V 24V COM

Input Voltage

Power Input

115V

115

230

LG N

Used on WayPoint17ADU

Ground

Lug

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220