WayPoint102 DC Outdoor Power Supply/Charger Installation Guide Rev. 083018 More than just power.
Overview: Altronix WayPoint102 DC Outdoor Power Supply/Charger provides 12VDC and is designed to be conveniently located where power is required. Specifications: Input: Visual Indicators: Output: Environmental: • Input: 120VAC, 60Hz, 3.5A. • Input fuse rating: 5A/250V. • Green AC Power LED indicates 120VAC present. • AC input and DC output LED indicators. • 12VDC @ 10A maximum supply current. • Auxiliary power-limited output rated @ 1A (unswitched). • Filtered and electronically regulated output.
14. Place a jumper for non-latching output. A momentary short on these terminals resets output latching [Trigger EOL Shutdown] (Fig. 1e, pg. 4). 15. Upon completion of wiring secure enclosure door with latches and optional lock. WARNING: When installing in a non-restricted service area use lock or other fastened means on door latches. This installation should be made by qualified service personnel and should conform to the National Electrical Code and all local codes.
OFF --- 24V ON --- 12V ON Fig. 1 - eFlow Board configuration --- DC + 1h --- BAT + 1i 1g Battery Fuse Input Fuse AC1 L G 1a N AC FAIL BAT FAIL AC DELAY SHUTDOWN O N NC C NO NC C NO 1b AC DC 1 min. 2 hr. enable disable 1c TRIGGER EOL SUPERVISED NO GND RESET 1d 1e + AUX – 1f Fig.
--- BAT + --- DC + Fig. 3 - WayPoint102 AC1 5A 250V L G N AC FAIL BAT FAIL AC DELAY SHUTDOWN O N NC C NO NC C NO AC DC 1 min. 2 hr. enable disable TRIGGER EOL SUPERVISED NO GND RESET + AUX – CAUTION HIGH VOLTAGE The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock.
Notes: -6- WayPoint102
Wall Mount Installation 1- Place unit at desired location and secure with mounting screws (not included) (Fig. 4, pg. 7). Fig. 4 Pole Mounting Using Optional Pole Mount Kit PMK1 (not included): This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 is intended for use with Altronix outdoor rated power supplies or accessories housed in WP1, WP2, WP3 and WP4 enclosures.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. IIWayPoint102 H30R -8- 8.00” (203.2mm) STAINLESS STEEL PIANO HINGE 11.31” (287.3mm) 3.96” (100.6mm) 12.75” (323.9mm) 13.50” (342.9mm) PADLOCK LATCH ATTACHED WITH RIVETS (Ø 0.375” (9.5mm) PADLOCK EYE). Ø 0.32 (8.1mm) MOUNTING HOLE TYP. 4 PLACES 5.59” (142mm) 13.31” (338.1mm) 1.61” (40.9mm) 10-32 X 0.375” (9.
