Data Sheet

VertiLine563
Rack Mount DC Power Supply
Rev. DSVertiLine563_08062015
Altronix Vertiline563 is a EIA 19” 1U rack mountable dual independent
power supply with optional battery backup that provides 56VDC. It is
intended primarily to be used in conjunction with respective Altronix
current and future products that requires 56VDC input such as: eBridge-
4PCRX, eBridge16PCRX, and eBridge1PCRX multi-port and single
port IP/PoE over coax adapters. However, it can also be employed wherever 56VDC
level power sources are needed.
There are applications which may require delivering power in a range of 48VDC to
57VDC over CAT5 cable for distances up to 100m. For these applications transmis-
sion at the higher voltage is more efficient, as it reduces cable losses when compared
to the lower voltage.
Specifications
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Input:
• Input 115VAC 60Hz, 4.9 amp.
Output:
• 56VDC @ 3 amp each output.
(When using battery backup, output rating is
56V/2.7 amp for respective outputs).
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.*
*External batteries are optional.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3 amp.
Electrical:
• Operating temperature: 32ºF to 104ºF (0ºC to 40ºC).
• 171.9 BTU/Hr.
• System AC input VA requirement: 563.5VA.
Features:
• Two (2) AC LED indicators.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19” rack.
Mechanical:
• Rack Dimensions (H x W x D approx.):
1.625” x 19.125” x 8.5”
(41.275mm x 485.775mm x 215.90mm)
• Product weight (approx.): 7.0 lbs. (3.18 kg.).
• Shipping weight (approx.): 8.3 lbs. (3.76 kg.).
Accessories:
• RE2: Rack mount battery enclosure. Accommodates
up to four 12VDC/7AH batteries (batteries not included).
CE European Conformity
Z1409
C-Tick compliant.
VertiLine563
Overview