Installation Instructions

Overview:
The unit converts a 12VDC-24VDC input into a regulated 24VDC ouput.
Altronix
Model Number Output Input
Cable
Assembly
Terminal
Block
VB1
24VDC @ 0.75A 12VDC - 24VDC x -
VB1T
24VDC @ 0.75A 12VDC - 24VDC - x
Specifications:
Installation Instructions:
1. Mount the unit in the desired location.
2. a. VB1: Connect Yellow (positive) lead
and Purple (negative) lead to 12VDC to
24VDC source. Observe polarity.
b. VB1T : Connect 12VDC to 24VDC
source to the terminals marked
[Input +] and [Input -- ].
3. Measure output voltage and check polarity
before connecting devices, in order to avoid
potential damage.
4. a. VB1: Connect Red lead [Pos. +] and
Black lead [Neg. --- ] to 24VDC device
to be powered.
b. VB1T : Connect 24VDC device to be powered to terminals marked [+ DC -- ].
5. LED will illuminate when power is present.
VB Series - Power Boosters
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
web site: www.altronix.com, e-mail: [e-mail]. Lifetime Warranty, Made in U.S.A.
IIVRseries - Rev. 081004 D15P
MEMBER
Fig. 1
Input:
• 12VDC-24VDC input.
Output:
• 24VDC @ 0.75A.
• Electronically filtered and regulated
output.
• Built-in overload protection.
LED Indicators:
• Power LED.
Applications:
• Compensates for voltage drop due to
long wire runs.
Applications (cont’d):
• Power for 24VDC Access Control
devices from a 12VDC power source.
Mechanical:
• High impact insulated housing.
• Compact design allows for integration
in a wide range of camera housings.
Dimensions (L x W x H approx.):
1.625” x 2.375” x 1”
(41.28mm x 60.32mm x 25.4mm).