Spec Sheet

Description

Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts an

IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs

up to 72W. Ideal for access installations, it eliminates the need for a high

voltage inside the enclosure. Tango8P(CB) is designed to support a single

12V LiFePO

(Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.

Tango8P & Tango8PCB

PoE Driven Multi-output Power Supply/Chargers

Rev. Tango8P - 011320

Tango8P

- Utilizes 4PPoE (802.3bt) to simultaneously deliver 12VDC &

24VDC for powering access control and security devices.

- Built-in Lithium Iron Phosphate (LiFePO

) battery charger for

optimized power backup.

- Operates with Altronix NetWay Midspans such as NetWay1BT,

NetWay4BT or NetWay8BT.

- Can be installed by any low voltage contractor.

- Eight (8) fuse or PTC protected outputs.

- Any of the eight (8) outputs are selectable for 12VDC or 24VDC.

- Individual outputs may be set to OFF position for servicing.

- Lifetime Warranty / Made in the U.S.A.

Key Features

PAGE 1
Tango8P & Tango8PCB PoE Driven Multi-output Power Supply/Chargers Description Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts an IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs up to 72W. Ideal for access installations, it eliminates the need for a high voltage inside the enclosure. Tango8P(CB) is designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for 12VDC and 24VDC backup. Tango8P Key Features - Utilizes 4PPoE (802.
PAGE 2
Tango8P & Tango8PCB PoE Driven Multi-output Power Supply/Chargers Specifications Ethernet Input 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W CAT-6 or higher cable is recommended for optimum performance Power Output (when using 802.3bt 90W) 12VDC up to 6.25A (72W), and/or 24VDC up to 3A (72W). Combined output not to exceed 72W. When charging batteries: 12VDC up to 5.4A (62W) and/or 24VDC up to 2.7A (62W). Combined output not to exceed 62W.