Installation Guide

Tango8P(CB) - PoE Driven Multi-Output Power Supply - 3 -
Overview:
Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts an IEEE802.3bt PoE input into eight
(8) regulated 24VDC and/or 12VDC outputs up to 75W. It eliminates the need for a high voltage inside the
enclosure. Tango8P(CB) is designed to support a single 12V LiFePO
4
(Lithium Iron Phosphate) battery for
12VDC and 24VDC backup.
Specifications:
Stand-by Specifications:
Battery Access Control Applications Stand-by
4AH 30 Mins.
7AH 45 Mins.
12AH 1.5 Hours
Ethernet Input:
• 802.3bt PoE up to 90W or 802.3at up to 30W
or 802.3af up to 15W.
Power Output (when using 802.3bt 90W):
• 12VDC up to 6.25A (75W)
and/or 24VDC up to 3A (75W).
Combined output not to exceed 75W.
• When charging batteries:
12VDC up to 5.4A (65W)
and/or 24VDC up to 2.7A (65W)
Combined output not to exceed 65W.
• Tango8P: Fuse protected outputs rated @ 3A
per output, non power-limited.
Tango8PCB: PTC protected outputs rated @ 2A
per output, Class 2 power-limited.
• Any of the eight (8) fuse/PTC protected power
outputs are selectable to follow power Input 1 or
Input 2. Output voltage of each output is the same
as the input voltage of the input selected.
• Individual outputs may be set to OFF position
for servicing.
• Surge suppression.
Fuse/PTC Ratings:
• Main input fuses rated @ 10A/32V each.
• PDS8: output fuses rated @ 3A/32V each.
• PDS8CB: output PTCs rated @ 2A each.
• TANGO1B: battery fuse rated @ 10A/32V each.
Ethernet Output (Tango1B):
• Pass-through Ethernet Port (data only).
• 100/1G.
Battery (Tango1B):
• 12VDC battery charger for Lithium Iron
Phosphate Battery (LiFeP0
4
only).
Battery (cont’d) (Tango1B):
• Unique technology allows for single battery
to backup 12VDC and/or 24VDC systems.
• Low power shutdown. Shuts down DC output
terminals if battery voltage drops below 80% of
nominal. Prevents deep battery discharge.
Supervision:
• Loss of PoE Input.
• Battery Supervision.
Visual Indicators:
• Tango1B
- Input indicates input voltage is present.
- Battery status indicates battery trouble condition.
- PoE Class indicator.
- Supervision PoE Fail or BAT Fail.
• PDS8(CB)
- Individual voltage LEDs indicate
12VDC (Green) or 24VDC (Green and Red).
Environmental:
• Operating temperature: 0ºC to 49ºC ambient.
• Humidity: 20 to 85%, non-condensing.
Enclosure Dimensions (approximate H x W x D):
15.5” x 12.25” x 4.5” (394mm x 311mm x 114mm).
Accessories:
Power Sourcing Equipment
NetWay1BT - Single Port Managed Hi-PoE
Injector supplies 90W total power.
NetWaySP1BT - 802.3bt Media Converter/
Injector supplies 90W total power.
NetWay4BT - 4-Port Managed Hi-PoE
Midspan Injector supplies 480W total power.
NetWay8BT - 8-Port Managed Hi-PoE
Midspan Injector supplies 480W total power.