Installation Guide

ManualsBrandsAltronix ManualsAutomation & SecurityPoE Driven Multi-output Power Supply/Charger, BC400 Enclosure

Rev. TANGO8A-083019

More than just power.

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Tango8P Series

PoE Driven Multi-Output Power Supplies

with Lithium Battery Backup

Models Include:

Tango8P

- 12VDC and/or 24VDC selectable by output @ 72W max.

- Eight (8) fuse protected outputs

- Built-in Lithium Iron Phosphate Battery Charger

Tango8PCB

- 12VDC and/or 24VDC selectable by output @ 72W max.

- Eight (8) Class 2 power-limited PTC protected outputs

- Built-in Lithium Iron Phosphate Battery Charger

Installation Guide

Summary of content (8 pages)

PAGE 1
Tango8P Series PoE Driven Multi-Output Power Supplies with Lithium Battery Backup Models Include: Tango8P - 12VDC and/or 24VDC selectable by output @ 72W max. - Eight (8) fuse protected outputs - Built-in Lithium Iron Phosphate Battery Charger Tango8PCB - 12VDC and/or 24VDC selectable by output @ 72W max. - Eight (8) Class 2 power-limited PTC protected outputs - Built-in Lithium Iron Phosphate Battery Charger Installation Guide Rev. TANGO8A-083019 More than just power.
PAGE 2
Table of Contents: Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3 Stand-by Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 3 Installation Instructions . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Overview: Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts an IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs up to 72W. Ideal for access installations, it eliminates the need for a high voltage inside the enclosure. Tango8P(CB) is designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for 12VDC and 24VDC backup. Specifications: Ethernet Input: Battery (Tango1B): • 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W.
PAGE 4
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, the Canadian Electrical Code and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Mount unit in desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding.
PAGE 5
Wiring: Use 18 AWG or larger for all low voltage power connections. LED Diagnostics: Tango1B LED Input Battery PoE Supervision Class Class 1 Class 2 Class 3 Class 4 ON Input voltage is present. Normal operating condition. Indicates Class. PoE Fail or BAT Fail. Green – – Off Off Red – – Off On Blue – – Off Off BLINKING Input voltage not present. Battery is low or missing.
PAGE 6
Fig.
PAGE 7
Available Power Using Structured Cable (CAT-5e) Distance (Feet/Meters) 328 (100m) 300 (91m) 250 (76m) 200 (61m) 150 (46m) 100 (30m) 50 (15m) 4 (1.2m) Available Watts 12VDC Available Amps 24VDC Available Amps 60 61 62 64 66 68 70 72 5 5.08 5.24 5.39 5.54 5.69 5.84 6.0 2.5 2.5 2.62 2.7 2.77 2.85 2.92 3.
PAGE 8
Enclosure Dimensions (BC400): 15.5” x 12.25” x 4.5” (394mm x 311mm x 114mm) 1.5” (38.1mm) 4.615” (117.2mm) 4.615” (117.2mm) 1.5” (38.1mm) 1.75” (44.5mm) 1.25” (31.8mm) 4.5” (114.3mm) 4.5” (114.3mm) 12.23” (310.6mm) 1.1” (27.9mm) 1.1” (27.9mm) 1.375” (34.9mm) 1.5” (38.1mm) 1.25” (31.8mm) 1.5” (38.1mm) 0.91” (23.1mm) 0.91” (23.1mm) 1.125” (28.6mm) 15.5” (393.7mm) 2.0” (50.8mm) 2.0” (50.8mm) 5.0” (127.0mm) 0.79” (20.1mm) 5.0” (127.0mm) 1.25” (31.8mm) 1.25” (31.8mm) 1.1” (27.9mm) 1.