Spec Sheet

Description
Altronix Tango8AP(CB) PoE Driven Multi-Output Power Supply/Charger With
Access Power Controller converts an IEEE802.3bt PoE input into eight (8)
regulated 24VDC and/or 12VDC outputs and eight (8) protected 24VDC and/or
12VDC outputs up to 65W. It eliminates the need for a high voltage inside of
an enclosure. Tango8AP(CB) is designed to support a single 12VDC LiFePO4
(Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.
Tango8AP & Tango8APCB
PoE Driven Multi-Output Power Supply/Chargers
With Access Power Controllers
Rev. Tango8AP - 10212019
Tango8AP
Key Features
- Utilizes Hi-PoE (802.3bt) to simultaneously deliver 12VDC &
24VDC for powering access control and security devices.
- Built-in Lithium Iron Phosphate (LiFePO
4
) battery charger for
optimized power backup.
- Operates with Altronix NetWay Midspans such as NetWay8BT.
- Can be installed by any low voltage contractor.
- Eight (8) independently controlled outputs.
- Eight (8) auxiliary power outputs (unswitched).
- Fire Alarm disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.
- Alarm output relay indicates that FACP input is triggered.
- Eight (8) additional fuse or PTC protected power outputs.
- Any of the sixteen (16) outputs are selectable for
12VDC or 24VDC.
- Individual outputs may be set to OFF position for servicing.
- Supervision:
- AC Fail
- Battery Fail and Battery Presence.
- Lifetime Warranty / Made in the U.S.A.