Installation Guide

- 4 - Tango8AP(CB) - PoE Driven Multi-Output Power Supply/Charge With Access Power Controller

Battery (Tango1B):

• 12VDC battery charger for Lithium Iron Phosphate Battery (LiFeP0

only).

• Unique technology allows for single battery to backup 12VDC and/or 24VDC systems.

• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of

nominal. Prevents deep battery discharge.

Supervision (Tango1B):

• Loss of PoE Input.

• Battery Supervision.

Fire Alarm Disconnect:

• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the

eight (8) outputs.

Fire Alarm disconnect input options:

a) Normally open [NO] or normally closed [NC] dry contact input. Polarity reversal input from

FACP signaling circuit.

• FACP input WET is rated 5-30VDC 7mA.

• FACP input EOL requires 10K end of line resistor.

• FACP output relay [NC]: either Dry 1A/28VDC, 0.6 Power Factor or 10K resistance with [EOL JMP] intact.

Visual Indicators:

• Tango1B

- Input indicates input voltage is present.

- Battery status indicates battery trouble condition.

- PoE Class indicator.

- Supervision PoE Fail or BAT Fail.

• ACMS8(CB)

- Red LEDs indicate outputs are triggered.

- Blue LED indicates FACP disconnect is triggered.

- Individual voltage LED indicates 12VDC (Green) or 24VDC (Red).

• PDS8(CB)

- Individual voltage LEDs indicate 12VDC (Green) or 24VDC (Green and Red).

Environmental:

• Operating temperature: 0ºC to 49ºC ambient.

• Humidity: 20 to 85%, non-condensing.

Enclosure Dimensions (approximate H x W x D):

15.5” x 12.25” x 4.5” (394mm x 311mm x 114mm).

Accessories:

Power Sourcing Equipment

NetWay1BT - Single Port Managed Hi-PoE Injector supplies 90W total power.

NetWaySP1BT - 802.3bt Media Converter/Injector supplies 90W total power.

NetWay4BT - 4-Port Managed Hi-PoE Midspan Injector supplies 480W total power.

NetWay8BT - 8-Port Managed Hi-PoE Midspan Injector supplies 480W total power.

Stand-by Specifications:

Battery Access Control Applications Stand-by

4AH 30 Mins.

7AH 45 Mins.

12AH 1.5 Hours