Installation Guide

Tango8AP(CB) - PoE Driven Multi-Output Power Supply/Charge With Access Power Controller - 3 -
Overview:
Altronix Tango8AP(CB) PoE Driven Multi-Output Power Supply/Charger With Access Power Controller con-
verts an IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs and eight (8) protected
24VDC and/or 12VDC outputs up to 65W. It eliminates the need for a high voltage inside of an enclosure.
Tango8AP(CB) is designed to support a single 12VDC LiFePO
4
(Lithium Iron Phosphate) battery for 12VDC
and 24VDC backup.
Specifications:
Inputs:
Tango1B:
• 802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W.
ACMS8/ACMS8CB:
• Eight (8) trigger inputs:
a) Normally open (NO) inputs (dry contacts).
b) Normally closed (NC) inputs (dry contacts).
c) Open collector sink inputs.
d) Wet Input (5VDC - 24VDC) with 10K resistor
e) Any combination of the above.
Outputs:
Tango1B:
• 12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W).
Combined output not to exceed 65W.
• When charging batteries:
12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W)
Combined output not to exceed 55W.
• ACMS8:
- Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max.
• ACMS8CB:
- PTC protected outputs rated @ 2A per output, Class 2 power-limited. Total output 16A max.
Do not exceed the individual power supply ratings. See Input/Output Voltage Ratings, pg. 6.
Total output current should not exceed max. current rating of the power supplies employed on each input.
See Maximum Output of Altronix Power Supplies.
• Eight (8) selectable independently controlled outputs or eight (8) indepently controlled Form “C” relay outputs
(see below for ratings):
a) Fail-Safe and/or Fail-Secure power outputs.
b) Form “C” relays rated @ 2.5A. 5, 12, 24VDC, 0.6 Power Factor (ACMS8 only).
c) Auxiliary power outputs (unswitched).
d) Any combination of the above.
• Individual outputs may be set to OFF position for servicing (output jumper set to middle position).
Does not apply to Dry Contact applications.
• Any of the eight (8) fuse/PTC protected power outputs are selectable to follow power Input 1 or Input 2.
Output voltage of each output is the same as the input voltage of the input selected.
See Input/Output Voltage Ratings, pg. 6.
PDS8:
• Fuse protected outputs rated @ 3A per output, non power-limited.
PDS8CB:
• PTC protected outputs rated @ 2A per output, Class 2 power-limited.
• Surge suppression.
Fuse/PTC Ratings:
• ACMS8(CB)
- Main input fuses rated 15A/32V each.
- ACMS8: output fuses are rated 3A/32V.
- ACMS8CB: Output PTCs are rated 2A.
• PDS8(CB):
- Main input fuses rated @ 10A/32V each.
- PDS8: output fuses rated @ 3A/32V each.
- PDS8CB: output PTCs rated @ 2A each.
• TANGO1B: battery fuse rated @ 10A/32V each.
Ethernet Output (Tango1B):
• Pass-through Ethernet Port (data only).
• 100/1G.