Spec Sheet

Description
Altronix Tango8A PoE Driven Power Supply with Access Power Controller converts
an IEEE802.3bt (4PPoE) input into eight (8) regulated 24VDC and/or 12VDC outputs
up to 65W. It eliminates the need for a high voltage inside of an enclosure. Tango8A
is designed to support a single 12VDC LiFePO
4
(Lithium Iron Phosphate) battery for
12VDC and 24VDC backup.
Tango8A & Tango8ACB
Access Power Controller
with PoE Driven Power Supply/Charger
Rev. Tango8A(CB) - 10212019
Tango8A
- Utilizes Hi-PoE (802.3bt) to simultaneously deliver 12VDC &
24VDC for powering access control and security devices.
- Built-in Lithium Iron Phosphate (LiFePO
4
) battery charger for
optimized power backup.
- Operates with Altronix NetWay Midspans such as NetWay8BT.
- Can be installed by any low voltage contractor.
- Eight (8) independently controlled outputs.
- Any of the eight (8) outputs are selectable for 12VDC or 24VDC.
- Eight (8) auxiliary power outputs (unswitched).
- Supervision:
- AC Fail
- Battery Fail and Battery Presence.
- Fire Alarm disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.
- Alarm output relay indicates that FACP input is triggered.
- Lifetime Warranty / Made in the U.S.A.
Key Features