PoE Driven Power Supply with Lithium Battery Backup Installation Guide Tango1B Rev. TANGO-071119 More than just power.
Overview: Altronix Tango1B PoE Driven Power Supply/Charger converts an IEEE802.3bt PoE input into a regulated 24VDC and/or 12VDC output up to 72W. Ideal access installations, it eliminates the need for a high voltage power supply inside of an enclosure. The Tango 8-pin connector allows for stacking with compatible Altronix sub-assemblies such as ACMS8(CB), LINQ8ACM(CB) or PDS8(CB) saving valuable enclosure space.
Fig. 1 - Tango1B configuration 1c 1b 1d 1e 1g 1f 1a Wiring: Use 18 AWG or larger for all low voltage power connections. LED Diagnostics: LED ON BLINKING Input Input voltage is present. Input voltage not present. Battery Normal operating condition. Battery is low or missing. PoE Indicates Class. Refer to table below Classes 3-8 Supervision PoE Fail or BAT Fail. NC dry contact 30V 1A (not an LED) PoE Input Class (W) Green Red Blue Class 1 (3.84) --- --- --- Class 2 (6.
Available Power Using Structured Cable (CAT-5e) Distance (Feet/Meters) Available Watts 12VDC Available Amps 24VDC Available Amps 60 61 62 64 66 68 70 72 5 5.08 5.24 5.39 5.54 5.69 5.84 6.0 2.5 2.5 2.62 2.7 2.77 2.85 2.92 3.0 328 (100m) 300 (91m) 250 (76m) 200 (61m) 150 (46m) 100 (30m) 50 (15m) 4 (1.2m) Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.
